4.3. Installation
Check if all the parts are in the box, see
“FIG.11”.
•
FIG.12 & 13:
Ensure the size of cabinet and ventilation are
enough.
•
FIG.14:
Slowly and carefully push the appliance into the cabinet.
Ensure the opening side is as close to the cabinet wall as
possible.
•
FIG.15:
Open the door of the appliance and the furniture door.
Screw the guide to holes in the side of appliance door with short
screws. Insert the slider into the guide and place it at 2 cm from
the hedge of the furniture door. Mark the position of the screws
from the slider, then take the slider out and unscrew the guide
from the appliance door.
•
FIG.16:
Fix the slider on the furniture door, using the short
screws, where marked. Then fix slider cover onto the slider.
•
Repeat from
FIG.15
to fix the other sliders and covers
•
FIG.17:
Once al the sliders are positioned and fixed, bring the
appliance door to the furniture door to screw all the guides back
onto the door of your appliance.
•
FIG.18:
Double check the door can close and open smoothly and
appliance is sealed well. If not, slightly adjust the unit. Then fix
bottom bracket with wooden cabinet by two long screws.
•
FIG.19:
Fix top bracket with wooden cabinet by short screws.
•
FIG.20:
Attached rubber seals to the gap between unit and
wooden cabinet at door open side.
4.4. Accessories
Glass shelves
The walls of the refrigerator are equipped with a series of runners
so that the shelves can be positioned as desired.
Door balconies (if available)
To permit storage of food packages of various sizes, the door
balconies can be removed. To make these adjustments proceed as
follows: gradually pull the balcony in the direction of the arrows until
it comes free.
Содержание REI540122
