Electrovaya PowerPad 600C, Инструкция по безопасности и эксплуатации

Страница: 8 / 15

8
Please Note: Electrovaya assumes no liability for problems that occur when the instructions for use and safety information are not followed.
UNDERSTANDING THE FUEL GAUGE
The PowerPad
®
600C uses a comprehensive fuel-gauge system to
indicate its charging/discharging state.
The fuel gauge displays the following information:
While the PowerPad
®
600C fuel gage provides a relatively accurate
state of charge during discharge, it more accurately shows the true
state of charge when idle. It is therefore normal for the PowerPad
®
600C to alter it has been idle for more than an hour.
If voltage on any cell drops below 3.35 V the buzzer starts beeping
and internal circuit will disconnect the internal battery. Battery needs
to be immediately charged.
If user decides to store PowerPad
®
600C, please following
STORAGE & HANDLING Section on page 5.
GETTING STARTED
1. Read this Safety and Instruction Manual in its entirety prior to
using your PowerPad
®
600C.
2. Ensure your package contains the PowerPad
®
600C and its
accessories as shown on page 11.
3. Use supplied AC adapter to charge the PowerPad
®
600C. Using
PowerPad
®
connection cable, connect AC adapter to PowerPad
®
600C and turn on and a beep will sound once.
Cell Number
Pack Voltage
Highest Volt/Cell
Lowest Volt/Cell
Fully Charged
Maximum Voltage
Difference
Fully Discharged