ElectroSmash Germanium Fuzz, Руководство пользователя, Страница: 6 / 11

STEP 6 – Place the Germanium PNP Transistors.
The germanium transistors have a dot that indicate polarity,
place them on the PCB following the same dot.
Note: The transistors have to be close but not touching each other.
If you have transistors with different gains (Hfe), it is better to use the one with lower
gain as Q1 and the one with higher gain on Q2.
 Q1 = lower gain.
 Q2 = higher gain.
Note: The potentiometer little leg is not needed, so you can cut it
Axial electrolytic cap polarity:
rubber top metal top