ElectroSmash Germanium Fuzz, Руководство пользователя, Страница: 3 / 11

STEP 2 – Place the bridge cables.
Note: These cables will connect the PCBs between them. You can pre-form the cables
in a round and smooth “U” shape by bending them with a curved object (pen). Don’t
force the cables many times or do hard bents, they may break.
STEP 3 – Place the big components.
Top
Side
Bottom
Side
S
o
ld
e
r
o
n
to
p
s
id
e
S
o
ld
e
r
o
n
b
o
tt
o
m
s
id
e
Solder on
top side
Solder on
bottom side
Important:
Once soldered,
cut all the Jack
pins as close
as possible to
the PCB
Make sure
there are no
short circuits