
7
HOW TO START
M-Blaster2 is supplied with a software E-link for the Personal Computer
that allows the MIDI and MP3 file transfer directly from the PC to the M-
Blaster2 data storage unit (Compact Flash Card) and moreover can be
used for backup operations.
First of all install the supplied software on the Personal Computer and,
successively, connect M-Blaster2 through a standard USB cable A/B
(such as the one used for USB printers ) to a properly functioning USB
port on the PC.
Note: when executing the program, if correctly set, M-Blaster2 will
automatically position on the “USB” page.
After having done this, launch the program double clicking on the icon
previously created during installation. As for the utilization, please refer to
the on-line guide included with the software.
SWITCHING ON
To switch the M-Blaster2 on, it is sufficient to insert the supplied adapter
connector in the corresponding socket positioned on the back panel and
push the ON button.
The display will light and after a few seconds wait, the display will read
the following:
READING PROGRAM
Shortly followed by
ESS
M-BLASTER 2
VERSION XXXX
MIDI MP3 PLAYER