Electron Analog Rytm MKII, Быстрое руководство

Страница: 27 / 36

27
3. Press any of the
[PADS]
to mute the corresponding track. Press again to unmute.
The color of the <PADS> indicates the mute status. Unlit <PADS> are muted. Green
<PADS> are audible.
4. Press and hold [FUNC] and then any of the [PADS] to preselect a mute, or mute/un-
mute several tracks in one go. Once you release [FUNC] , the selected mutes come
into effect. Blue colored <PADS> show the preselected mutes.
6. THE SEQUENCER
The sequencer of the Analog Rytm MKII stores beat information in patterns. A pattern
controls the playback of the drum tracks, the FX track and various pattern-specific as-
pects of these.
6.1 SELECTING A PATTERN
1. Press [BANK A–H] and then [TRIG 1–16] to select bank and pattern
Patterns containing data are indicated by half-bright red
[TRIG]
keys. The currently active
pattern is indicated by a full-bright red [TRIG] key.
6.2 PATTERN CONTROL
Press [PLAY] to start the playback of a pattern. Press [STOP] to stop the playback of all
tracks. The sound will be cut off, but effects like Delay will continue to be audible until the
delay repeats have faded out. Quickly press
[STOP]
twice to stop playback of all tracks
and the fade out of the send effects.
When a pattern is playing and
[PLAY]
is pressed the playback will pause. Press
[PLAY]
again to resume the playback.
If a pattern contains more than 16 sequencer steps, the <PAGE> LEDs will indicate this.
When a pattern is playing, the currently active pattern page is indicated by a blinking,
full-bright, <PAGE> LED