Electron Analog Rytm MKII, Быстрое руководство

Страница: 26 / 36

26
5.4 USING SCENE MODE
The SCENE mode turns the twelve pads into instant sound shifters. Similar to a perfor-
mance macro, several parameters from any track can be changed by pressing a single
pad. A scene is a fixed set of parameter values, ready to be activated or deactivated,
shown with dim blue <PADS>. A bright blue color pad shows the active scene.
1. Make sure a pattern is playing.
2. Press the
[SCNE] key to enter SCENE mode.
3. Tap one of the dim blue color [PADS] to activate a scene. Tap again to deactivate.
5.5 USING CHROMATIC MODE
Any track Sound may be played chromatically using the 12 pads. The chromatic note pitch
is increased linearly for each successive pad pressed: left to right, bottom to top. Twelve
successive pads make one octave. The range spans four octaves, middle, one up and two
down. The middle octave has sky blue color <PADS>, the two below are of violet and dark
blue color, in that order, and the one above is yellow.
1. Select the drum track to play chromatically by pressing [TRK] + one of the [PADS] .
2. Press the [CHRO] key to enter CHROMATIC mode.
3. Play the [PADS] . The active track Sound will be pitched differently for each of the
12 pads comprising the middle octave. Reach higher or lower octaves, one row at a
time, by pressing
[ARROW] keys [UP] or [DOWN] , respectively
5.6 USING MUTE MODE
You can mute the sequencer of any of the twelve drum tracks in this mode. Unlike the
CHROMATIC mode, it makes no difference which track is active when this mode is activat-
ed. All tracks are accessed simultaneously.
1. Make sure a pattern is playing.
2. Press the
[MUTE] key to enter MUTE mode.