Intermittent stimulation (P1 - P2 - P5 - P6 - P7 - P12)
The programs indicated above include rest periods between muscle contractions (work phase) as illustrated below.
+ manual controller (P11)
OPERATION
The contraction increases progressively during the ramp-up phase and reaches its maximum during the work phase. During the ramp-down phase,
the stimulation reduces progressively until the start of the rest phase.
During intermittent stimulation programs, the work/rest symbol
is displayed on the screen. The upper part of the symbol blinks
in work phase while the lower part blinks in rest phase.
For program 11, the manual controller is used to change intensity quickly during childbirth. There are two intensity settings for this program,
one for the contraction phase and one for when the contraction has finished. Once the two intensity levels have been set, you only need
to press the button to toggle between them.
AMPLITUDE SETTING FOR CONTRACTIONS (work phase)
When the upper part of the work/rest symbol
is blinking, increase the intensity gradually until you achieve painless muscle contractions.
3.2
SPECIAL
INSTRUCTIONS
1
1
2
2
3
3
4
4
• 1- ramp-up phase
• 2- work phase
• 3- ramp-down phase
• 4- rest phase
17
page
