Do not place the device in a position
where it will be difficult to quickly
reach the main power source
to cut it off if needed.
DEVICE
SETUP
FOR THE PATIENT
INSTRUCTIONS
The Electro-Medic EVA
stimulator gives you the option
of choosing the treatment mode
that best suits your needs: treatment
by NMES or TENS. In addition, since
it has 2 separate outputs, it allows
you to treat several parts of the
body at once in different modes with
different intensities; some programs
and parameters can be modified under
the supervision of a qualified health
care professional.
For optimal and completely safe
use, only use accessories provided
by Electro-Medic. In addition,
setting the device to the appropriate
intensity and only increasing the level
gradually will provide the comfort,
improvement and relief you seek.
Increasing levels too quickly is not
recommended.
3
N.B.
Only works for NMES
programs
Be careful when handling the wires to avoid
damaging them. The electrodes used
with this device must never be smaller
than 2.54 cm in size. Be aware that
the smaller the electrodes are, the more
intense the stimulation will be at the site
of the electrodes.
CONNECTING THE ELECTRODES
TO THE WIRES
B.1
Be careful when handling the wires to avoid
damaging them. Please make sure that the
probe is clean before use.
CONNECTING THE PROBE
TO THE WIRES
(probe not included)
B.2
(Please refer to the section:
REPLACING THE BATTERY
3.7 for more information)
INSERTING
THE LI-ION BATTERY
INTO THE DEVICE
A
CONNECT THE WIRES TO THE UNIT –
NMES
–
AT THE INPUT FOR EACH
CHANNEL
D
CONNECT THE MANUAL
CONTROL CONTROLLER
(if required)
E
Press the
ON/OFF
button
TURN ON THE DEVICE
F
-
+
15
page
Apply to non-
irritated skin
that has been
washed and
dried, for the
best adherence
and optimal
electrode
performance.
C.1
APPLY THE ELECTRODES
Insert the probe,
using the gel
(recommended
for maximum
performance).
Do not insert the
probe too deeply.
For more detailed
information, please consult your
qualified health care professional.
C.2
INSERT THE PROBE
(probe not included)
3.1
