Electrolux Z5600 Series Скачать руководство пользователя страница 10

Страница: 10 / 16

How to Check and Clear Hose Blockages

Low suction or poor pick-up may be due to a blockage

in the vacuum cleaner.

1. Remove hose from hose retainer and check suction at

end of hose - if little or no suction, check dust cup. Empty

if needed. If no improvement, proceed to step 2.

CAUTION: Turn off the switch and unplug the electrical

cord before clearing hose.

2. Remove electrical cord from cord hooks. Disconnect the

clear tube by turning quarter turn fastener to the right

to release, then lift away from cleaner.

Check for any obstructions that may be in the tube. Any

obstructions can be removed by using a blunt instrument

to clear the tube.

3. To completely release hose from the unit, remove two

screws.

Any obstructions can be removed by using a blunt

instrument to clear the hose. Flexing the hose may help

loosen the blockage.

After clearing blockage, reverse above steps to reassemble

unit.

2. Disconnect clear tube.

1. Remove hose from hose retainer and

check suction at end of hose.

3. Release hose from unit.

Hose Retainer

Clear
Tube

Quarter Turn

Fastener

Two Screws

Electrical Cord

Содержание Z5600 Series

















Результаты поиска

Содержание Z5600 Series

Отзывы:

Похожие инструкции для Z5600 Series

Бренды по названию

Популярные бренды

Electrolux Z5600 Series, Руководство пользователя

Результаты поиска

Содержание Z5600 Series

Отзывы:

Похожие инструкции для Z5600 Series

Бренды по названию

Популярные бренды