Electrolux WS290, Руководство пользователя

Страница: 46 / 60

electrolux 44
Safety Instructions
Warning! Before connecting the
appliance compare the power data
(voltage and frequency) indicated on
the characteristics plate with those of
the power supply in question. If these
data do not match there may be
problems. In case of doubt, contact an
electrician.
Warning! If the electrical wire plug is
removed, the appliance must be
installed
and connected by a
technician. Contact a qualified
electrician who knows and respects
current
safety standards. The
manufacturer cannot be held
responsible for damage resulting from
fitting or connecting errors.
Warning! The electrical safety of the
appliance can only be guaranteed if it
is earthed. The manufacturer cannot
be held responsible for damage
resulting from the absence of or
defects in the installation
‟s protection
system (e.g. electrical shock).
Warning! Only use the appliance once
it has been fitted into its built-in
position. Only in this manner can it be
guaranteed that users cannot access
the electrical components.
Warning! Never open up the
appliance
‟s frame. Possible contacts
with electrical conducting parts or
changes to electrical or mechanical
components may
represent a danger to users
‟ safety
and prejudice the correct working of
the appliance.
Warning! Repairs and maintenance,
especially of parts carrying electrical
current, must only be done by
technicians
authorised by the
manufacturer. The manufacturer and
retailers do not accept
responsibility for any damaged
caused to people, animals or property
as a result of repairs and maintenance
carried
out by non-authorised
personnel.
Warning! Repairs undertaken during
the guarantee period must only be
done by technicians authorised by the
manufacturer. If this is not the case
then any damage resulting from the
repair in question is excluded from the
guarantee.
Warning! The appliance must be
disconnected from the electrical
current when installation and repair
work is being done. To disconnect the
appliance from the current, one of the
following conditions must apply:
- The switchboard fuses / circuit
breakers must be disconnected.
- The plug should be removed from the
socket. To remove the plug from the
socket do not pull on the electric cable
but rather pull out the plug itself
directly.