Handling
17
3.4 Additional functions
There is a menu with additional functions available for selection after start. When pressing the
control knob / start button (on machines without control button) the menu will appear on the display.
Select from the menu by turning the control knob / pressing the temperature button/-s and press the
control knob / start button to activate.
Note!
Some of the functions may not be available or active on your machine.
Stop function
If the machine is programmed with this function, it is possible to stop the machine during program
run by pressing the control knob.
When pressing the control knob again the program will continue.
Pause
It is possible to pause an ongoing program.
Select
PAUSE
and activate.
When pressing the control knob / start button again the program will continue.
The door can be opened after a short while if the water level is not too high. Close the door and
press the control knob / start button to continue.
Changing a program after start
It is possible to change a program after start.
Select
CHANGE PROGRAM
and activate.
When pressing the control knob / start button the program menu will be displayed. Select a new
program and start by pressing the control knob / start button.
Rapid advance
Select
RAPID ADVANCE
and activate.
When pressing the control knob / start button a list with all program steps will be displayed. Select
desired program step from the list by turning the control knob / pressing the temperature button/-s
and press the control knob / start button to activate.
End a program
It is possible to end a program after start.
Select
END PROGRAM
and activate.
When pressing the control knob / start button the program will be ended. When the water is drained
the door will be unlocked.
