Electrolux TWL3E300, Руководство пользователя

Страница: 20 / 60

Problem 1)
Possible cause Remedy
Unsatisfactory
drying result.
Incorrect programme selection.
Select a suitable programme. 2)
The filter is clogged.
Clean the filter. 3)
Dryness (Trockengrad) op‐
tion was set to iron dry (Bü‐
geltrocken) .4)
Change Dryness (Trocken‐
grad) option to a higher level.
The load was too large. Do not exceed the maximum
load size.
The airflow slots are clogged. Clean the airflow slots at the bot‐
tom of the appliance.
There is some dirt on the humidi‐
ty sensor in the drum.
Clean the front surface of the
drum.
The dryness level was not set to
the desired level.
Adjust the dryness level. 5)
The condenser is clogged.
Clean the condenser. 3)
The loading
door does not
close
The filter is not locked into posi‐
tion.
Put the filter in the correct posi‐
tion.
Laundry is trapped between the
door and the seal.
Remove trapped items and close
the door.
It is not possi‐
ble to change
the programme
or option.
After a cycle starts it is not possi‐
ble to change the programme or
option.
Turn the tumble dryer off and on.
Change the programme or op‐
tion as required.
It is not possi‐
ble to select an
option. An
acoustic signal
is emitted.
The option you tried to select is
not available for the selected
programme.
Turn the tumble dryer off and on.
Change the programme or op‐
tion as required.
Unexpected
duration time
appears on the
display.
The drying duration is calculated
according to load size and
dampness.
This is automated - the appli‐
ance is working correctly.
A programme
is inactive.
The water container is full. Drain the water container, push
the
Start/Pause button. 3)
www.electrolux.com 20