Electrolux TC2, Руководство по обслуживанию

Страница: 46 / 78

SOI/DT 2010-03 dmm
46/78
599 72 84-41
Ö
Washing cycle tables: each washing cycle consists of a series of phases (steps); the steps are the basic
instructions which comprise the description of the cycle, which is common to all appliances having the same
characteristics.
- Water fill
- Motor movement
-
Reset
-
Heating
-
Drain
- Spin
- Conditions
“
IF
”
.... (options, temperatures, etc.)
Ö
Configuration of the washing cycle: for each family of appliances, certain parameters associated with the
washing cycle are defined.
- Working limits (voltage/frequency)
- Transmission ratios
-
Parameters for control of the signal from the tachometric generator
-
Parameters for half-range operation of the motor
- Structure of the washing group
- Control parameters for the FUCS anti-unbalancing system
- Water fill algorithm
-
Alarm control system
-
Sensor parameters (flowmeter, etc
…
)
11.1.3 RAM
This memory contains the variables, that is to say all the dynamic information used during running of the
programme:
Ö
Motor speed
Ö
Temperature of the water
Ö
Alarms
Ö
Cycle selected
Ö
Machine status
The memory is cancelled every time the power supply is disconnected (power failure or appliance switched off).
The contents of the memory can be read using a computer connected via a DAAS interface.
The same system can be used to send commands to the electronic control unit such as:
Ö
Select remote control mode
Ö
Activate the various loads in remote mode
Ö
Select diagnostic mode
Ö
Select a cycle and options, and start the cycle