Electrolux TANGO 3 XL Скачать руководство пользователя страница 73

Страница: 73 / 124

►Connecting the ST module to the machine

♦

LC hydraulic part

With a cappuccino LC the refrigerator is delivered with the pipe already fitted in the refrigerator, it remains

simply to feed it through the plate prepared for the purpose and fix it to the cappuccino outlet end.

►Installing the bins

To avoid damage during transport, machines are
delivered with the bins removed

INSTALLING THE BINS:

- The bins are fixed from behind. Respect the

direction of fitting.

- Position the closing trap on the bins; pay attention

to the direction of the opening of the trap.
- Access to the trap is by removing the side.

- Capacity: 1.7 kg (4,5 liters) for the large bin.
- Capacity: 1.2 kg (3 liters) for the small bin.

INSTALLING POWDER BIN:

- Remove the powder cover forwards (locked by
the lock).

- The hoppers are fixed from the rear. Observe the

mounting direction (picture).
- Reposition the cover and lock.

CAUTION:

Air must be able to circulate freely around the machine. The ventilation openings located at the rear of the
machine and on the top must not be obstructed.

The machine must not operate without its legs.

Содержание TANGO 3 XL





























































































































Результаты поиска

Содержание TANGO 3 XL

Отзывы:

Похожие инструкции для TANGO 3 XL

Бренды по названию

Популярные бренды

Electrolux TANGO 3 XL, Руководство по обслуживанию в полевых условиях и ПМ

Результаты поиска

Содержание TANGO 3 XL

Отзывы:

Похожие инструкции для TANGO 3 XL

Бренды по названию

Популярные бренды