2 4
2.
Pull the bottom edge of the door outwards
while twisting the hinge bracket in the direc-
tion shown by
the arrows.
3
. Move the hinge pin to the other side of the
bracket. When the door is hung
on the right side the hinge brack-
et must be turned upside down.
4
. Then transfer the hinge pin in
the underside of the top panel to the right side.
5
. Now transfer the plastic plugs in the top and
bottom of the door to the right side of the door.
Use a screwdriver to prise them out.
6
. Unscrew the two screws from the edges of
the door about five millimetres so that you can
remove the door magnet and plate from the
inside of the door.
7
. Lift out the door magnet (1) and plate (2).
8
. Refit the door magnet where the plate was.
9
. Refit the plate where the magnet was.
TUMBLE DRYER
MECHANICAL INSTALLATION
1
2
Hinge pin
