Electrolux T4130 Скачать руководство пользователя страница 5

5

Safety Precautions

Safety Precautions

Do not dry unwashed items in the machine

The machine is not to be used if industrial chemicals have been used for cleaning.

Do not allow minors to use the machine.

Do not hose down the machine with water.

The machine's door lock must under no circumstances be bypassed.

Items that have been soiled with substances such as cooking oil, acetone, alcohol, 

petrol, kerosene, spot removers, turpentine, waxes and wax removers should be 

washed in hot water with an extra amount of detergent before being dried in the 

machine.

Items such as foam rubber (latex foam), shower caps, waterproof textiles, rubber 

backed articles and clothes or pillows fitted with foam rubber pads should not be 

dried in the machine.

Fabric softeners or similar products should be used as specified by the fabric 

softener instructions.

The machine may not be used to dry floor mops that contain polypropylene.

The final part of a drying cycle occurs without heat (cool down cycle) to ensure that 

the items are left at a temperature that ensures that the items will not be damaged.

WARNING. Never stop the machine before the end of the drying cycle unless all items 

are quickly removed and spread out so that the heat is dissipiated.

Remove garments from the machine as soon as they are dried. This prevents them 

from becoming creased and reduces the risk of spontaneous ignition.

If the machine develops a fault, this must be reported to the person in charge as soon 

as possible. This is important both for your safety and that of others.

The machine must not be located where a door, sliding door, etc., can block the 

machine's door

The machine is not intended to be used by people (including minors) with reduced 

physical or mental capacity or lack of experience and knowledge. Such people must 

be instructed in the use of the machine by a person who has responsibility for their 

safety. Minors must be supervised to ensure that they do not play with the machine.

Adequate ventilation has to be provided to avoid the back flow of gases into the room 

for appliances burning other fuels, including open fires.

Gas heated tumble dryer:

The machine is not to be installed in rooms containing cleaning machines with 

perchloroethylene, TRICHLOROETHYLENE or CHLOROFLUOROCONTAINING 

HYDROCARBONS as cleaning agents.
If you can smell gas,

•  Do not switch on any equipment

•  Do not use electrical switches

•  Do not use telephones in the building

•  Evacuate the room, building or area

•  Contact the person responsible for the machine

In order to prevent damage to the electronics (and other parts) that may occur as the 

result of condensation, the machine should be placed in room temperature for 24 hours 

before being used for the first time.

Содержание T4130

























Отзывы: