Electrolux SuperCyclone, Руководство пользователя

Страница: 10 / 21

10
32a
32b
33a
33b
34
35
36
37a
37b
English
Getting the best results
Use nozzles as follows:
Carpets and hardfloors:
For carpets use the combination floor nozzle* with
lever in position (32a)
For
Hard floors , use the combination floor nozzle
with lever in position (32b). Make sure the brushes on
the nozzle are down to prevent scratching the floor
surface.
Reduce suction power for short pile small carpets.
With the Dust Magnet* nozzle there is normally no
need to switch mode (33a). It can be used with brush
up on all surfaces for maximum convenience with
maintained excellent dust removal result. The (33b)
brush setting should be used to reach optimal dust
removal on difficult hard floors or to get a combing
effect on carpets.
Wooden floors: Use the parquet nozzle* (34).
Upholstered furniture and fabrics: Use the up-
holstery nozzle* (35) for sofas, curtains, lightweight
fabrics etc. Reduce suction power if necessary.
Crevices, corners, etc.: Use the crevice nozzle* (36).
Using the turbo nozzle*
37a/b Ideal for carpets and wall-to-wall carpeting
to remove stubborn fluff and pet hairs.
Note: Do not use the turbo nozzle on animal skin rugs
or carpet fringes. To avoid damaging the carpet, do not
keep the nozzle stationary whilst the brush is rotating.
Do not pass the nozzle across electric cables, and be sure
to switch off the vacuum cleaner immediately after use.
* Certain models only.
㐕储Ё᭛
⥆ᕫ᳔ՇⱘՓ⫼ᬜᵰ䂟ᣝ✻ҹϟ䁾ᯢՓ⫼਌丁˖
ഄ⇃੠⹀䊾ഄᵓ˖
䞱ᇡഄ⇃ˈ䂟೼ԡ㕂D߽⫼㗍ᵓ՚Փ⫼ഄ⇃
⹀䊾ഄᵓ਌丁
䞱ᇡ⹀䊾ഄᵓˈ䂟೼ԡ㕂E߽⫼㗍ᵓ՚Փ⫼ഄ
⇃⹀䊾ഄᵓ਌丁DŽ⺎ֱ਌丁↯ࠋᳱϟˈҹܡࠂڋഄ
ᵓ㸼䴶DŽ
⏯䓩ⷁ῕ᇣൟഄ⇃ⱘ਌࡯ᔋᑺDŽ
᳝њ䲚้⺕䨉਌丁ˈ䗮ᐌህϡ䳔㽕ߛ᦯῵ᓣD
DŽ䲚้⺕䨉਌丁䙘ৃҹ䜡ᨁࠋᄤ೼᠔᳝㸼䴶ϞՓ⫼ˈ
೼ᦤկ催ᑺ߽֓ᗻⱘৠᰖˈֱ᳝㌩Շⱘ䰸้ᬜᵰDŽࡴ
㺱↯ࠋEৃҹ䘨ࠄ᳔Շⱘ䰸้ᬜᵰˈेՓᰃ⹀
䊾ഄᵓг↿⛵䲷ᑺˈ㗠⫼೼ഄ⇃Ϟᬜᵰ᳈ՇDŽ
᳼䊾ഄᵓ˖Փ⫼ᣐ㢅ഄᵓ਌丁DŽ
㽃๞ᆊ݋㟛㐨Ꮧ˖೼≭ⱐǃに㈒ǃ䓩䞣㐨ᏗП串ⱘ⠽ક
ϞՓ⫼㽃๞਌丁DŽᖙ㽕ᰖ䰡Ԣ਌࡯ᔋᑺDŽ
㏿䱭ǃ㾦㨑ㄝ˖Փ⫼䱭㏿਌丁DŽ
Փ⫼⏺䓾਌丁
DE 䘽⫼ᮐሔ䚼ഄ⇃㟛ᭈᅸഄ⇃ˈৃ⏙䰸䷥ᔋⱘ㌄
↯㟛ᇉ⠽↯僂DŽ
٭䀏˖䂟࣓೼ࢩ⠽Ⲃ⇃៪ഄ⇃⌕㯛ϞՓ⫼⏺䓾਌丁DŽ
㽕䙓ܡഄ⇃᧡າˈ䂟࣓೼䔝ࢩ↯ࠋᰖᇛ਌丁ֱᣕ೎ᅮ
ϡࢩDŽ䂟࣓䅧਌丁㟛䳏⑤㎮㑣㐲Ѹ䤃ˈϺ⺎ᅮ೼Փ⫼
ᕠゟࠏ䮰䭝਌఼้DŽ
ڙ䰤⡍ᅮൟ㰳DŽ