Electrolux Saladette 950, Инструкция по установке и эксплуатации

Страница: 23 / 26

23
M TROUBLESHOOTING
In some cases, faults can be eliminated easily and quickly by following a brief troubleshooting guide:
ANOMALY
TYPE OF
ANOMALY
DESCRIPTION POSSIBLE CAUSES ACTIONS
E0
rE
ALARM
Compartment
sensor fault
• Connector unplugged
• Probe and/or Probe wire
damaged
CALL SERVICE
E1 ALARM
Evaporator sensor
fault
• Connector unplugged
• Probe and/or Probe wire
damaged
CALL SERVICE
HI WARNING
Compartment high
temperature alarm
• Door or drawers left
opened
• Excessive load
• Malfunctioning on the
cooling unit
If the problem persist Call
Service
LO WARNING
Compartment low
temperature alarm
•
Malfunctioning on the
cooling unit
If the problem persist call
service
The appli-
ance does
not switch on.
— — — — — — — —
• Electric supply issue
• Make sure the plug is prop-
erly inserted in power socket.
• Make sure the socket is
powered.
• If the problem persists Call
Service.
The inside
temperature
is too high.
— — — — — — — —
• Door or drawers left open
• Issue with thermostat
setting
• Excessive load
• Heat source near the
appliance
• Make sure the doors or the
drawers close properly.
• Check the thermostat setting.
• Make sure there is no heat
source near the appliance.
• Make sure the product is
correctly loaded.
• If the problem persists Call
Service.
The appli-
ance is too
noisy.
— — — — — — — —
• Unit unlevelled or touch-
ing other equipment
• Make sure the appliance is
properly levelled. An unbal-
anced position can set off
vibrations.
• Make sure the appliance is
not touching other equip-
ment or parts which could
reverberate.
• If the problem persists Call
Service.
If the fault persists after carrying out the above checks, contact the Customer Care Service, remembering to specify:
A. the type of fault;
B. the appliance PNC (production number code);
C. the Ser. No. (appliance serial number).
NOTE!
The appliance PNC and serial number are essential for identifying the type of appliance and date of manufacture.
The dataplate giving the product and technical data is located inside the appliance. The plate giving the appliance PNC
code and serial number is located in the unit compartment.