Electrolux PA21G, Инструкция по эксплуатации, Страница: 10 / 17

9
IMPORTANT
Unplug the appliance from the power out-
let to replace the lamp. Be careful when
replacing the lamp to avoid injury.
UV Lamp Replacement (for PA31G)
If the UV lamp indicator lights up, unplug the
product from the power outlet, close the water
supply, remove the used UV lamp, and follow
the steps of UV Lamp Installation (Page 7) to
install the new lamp.
Grid and Water Collector
Periodically remove the grid and water collector
for cleaning. Wash them with water and a neu-
tral detergent.
IMPORTANT
For the first use, add one (1) teaspoon
(5 ml) of colorless vinegar to remove the
residual plastic flavor, if necessary.
Drainage port
clips
Water Tank
The water tank must be emptied for cleaning.
Open the top cover, remove the plastic cov-
er that protects the hole and pour a teaspoon
(5 ml) of colorless alcohol vinegar.
Open the water supply and wait for approxi-
mately 3 minutes until the tanks are filled.
Pour another teaspoon (5 ml) of alcohol vinegar.
After 10 minutes, empty the tank using the
drainage port located at the back of the product
and discard the water.
Allow the tank to refill with water and empty
it by removing at least 5 liters from each tank
(ice-cold and natural) before using it again to
remove any vinegar residue from the tank.
Anti-dust screen
The appliance comes with an anti-dust screen,
located at the bottom of the product, which has
the function of retaining impurities present in
the ambient air. This screen must be cleaned
and the procedure is simple:
1. Press both clips that attach it to the bottom
of the product simultaneously.
2. The cleaning is done manually, with the help
of running water.