background image

60

4.

Press   3    5    0  . “

350°

 

will flash and “

BAKE

will show in the display.

5.

Press 

Start

 . “

350°

 

and “

BAKE

 

will show in the

display.

6.

Press 

Cook Time. 

TIMED

” will flash; “

BAKE

”,

00:00

” and “

350°

 

will show in the display.

7.

Enter the desired baking time using the number
pads pressing   5   0  . “

TIMED

” will flash and

BAKE

”, “

00:50

” and “

350°

 

will show in the

display.

NOTE

: Baking time can be set for any amount of time

from 1 minute to 11 hours and 59 minutes (maximum
time for both 12 or 24 hour display modes).

8.

Press 

Start

 . Both the “

TIMED

” and “

BAKE

” icons

will remain on in the display. Once Timed Bake
has started, the current time will return in the
display.

NOTE:

 Once Timed Bake is actived, press 

Cook Time

to display the cook time remaining in the Timed Bake
mode.

9.

Press 

Clear Off 

when baking is complete or at any

time to cancel the Timed Bake mode.

Delay time bake - cook time and stop time:

The automatic timer will turn the oven 

on and off 

at the

time you select in advance.

To program the oven for a delayed start time and
to shutoff automatically:

(example bake at 350° F for 50 minutes finishing at 5:30)

1.

Be sure that the clock shows the correct time of
day.

2.

Arrange oven rack(s) and, if roasting or cooking a
casserole, place the food in the oven.

3.

Press 

Bake

, “

—°

 

will show in the display.

4.

Press   3    5    0  . “

350°

 

will flash and “

BAKE

will show in the display.

5.

Press 

Start

 . 

“350°” 

and 

“BAKE “ 

will show in the

display.

6.

Press 

Cook Time. 

TIMED

” will flash; “

BAKE

”,

00:00

” and 

“350°” 

will show in the display.

7.

Enter the desired baking time using the number

pads pressing   5   0  . “

TIMED

” will flash and

BAKE

”, “

00:50

” and “

350°

 

will show in the

display.

NOTE

: Baking time can be set for any amount of time

from 1 minute to 11 hours and 59 minutes (maximum
time for both 12 or 24 hour display modes).

8

Press 

Start

.”

TIMED

BAKE

” and 

“350°” 

will

appear.

9.

Press  

StopTime

. Enter the desired stop time

using the number pads  5   3   0  .

10. Press 

Start

. Once Timed Delay Bake has started,

the set oven temperature will disappear. “

TIMED

”,

DELAY

” and “

BAKE

” and the current time of time

will show in the display.

NOTE:

 Once Timed Bake is actived, press 

Cook Time

to display the cook time remaining in the Timed Bake
mode. Press 

Clear Off

 when baking has completed or

at any time to cancel the delayed timed bake mode.

When the set bake time runs out:

1.

“End” will appear in the display window and the
oven will shut off automatically.

2.

The control will beep 3 times.  The control will
continue to beep 3 times each minute until 

Clear

Off

 is pushed.

To broil:

When broiling, heat radiates downward from the oven
broil element for even coverage.  The broil feature is pre-
set to start broiling at 550° F. however, the broil feature
temperature may be set between 400° F and 550° F.

CAUTION:  DO NOT use the pan without its insert.

CAUTION:  DO NOT cover the insert with foil. The
exposed grease could ignite.  Should an oven fire
occur, leave the oven door closed and turn off the
oven. If the fire continues, throw baking soda on
the fire or use a fire extinguisher. DO NOT put wa-
ter or flour on the fire. Flour may be explosive and
water can cause a grease fire to spread and cause
personal injury.

To set the oven to broil:

(example

 

550° F)

1.

Place the insert on the broiler pan, then place the
food on the insert. 

DO NOT 

use the broiler pan

without the insert. 

DO NOT 

cover the broiler insert

with aluminum foil. The exposed fat could ignite.

Содержание NEXT GEN

























































































Отзывы: