12
Cycle Settings
Cycle Options
Fabric Type
Water
Temperature
Heavily soiled white/colorfast cotton,
perm press
Hot/Cold
Normally soiled white/colorfast cotton,
perm press
Warm/Cold
Lightly soiled cottons and perm press,
noncolorfast fabrics, knits, delicates, hand
washables
Cold/Cold
m/Cold
r
a
W
s
n
e
l
o
o
w
e
l
b
a
h
s
a
W
WATER LEVEL
Manual mode: Turn the knob to select the level of water
according to the amount of laundry. When selecting manually
ensure that the clothes are able to move freely in the amount
of water.
Auto mode: This washing machine offers a new and unique
Automatic Water Level sensing that saves water by allowing
you to wash each load efficiently with the ideal amount of
water. The washer begins filling water in the machine until a
minimum water level. Then, through a wash agitation, it
checks if the water is sufficient for the amount of clothes in the
tub. If there is more water required for the load of clothes, the
wash agitation stops and water fill starts again until the correct
water level is reached.
CAUTION:
Do not fill the washing machine by direct filling with a hose
into the tub. This will cause a malfuntion, causing damage to
the valves. The washing machine has a sensing system which
does not allow water to be filled past the highest level
allowable. Exceeding this highest level can lead to water
spilling on the floor, danger of short circuit and damage to the
washing machine.
WATER TEMPERATURE
Manual mode: Turn the knob to select the appropriate
temperature for the type of garments being washed.
Hot/Cold - Hot water for wash cycle and Cold water for rinsing.
Warm/Warm - Warm water for wash and rinse cycles.
Cold/Cold - Cold water for wash and rinse cycles.
Warm/Cold - Warm water for washing and Cold water for
rinsing.
Auto mode: The washer automatically selects the correct
temperature for the Wash Program selected.
The following chart suggests wash/rinse temperatures for
basic fabric types.
SOAK
This function prior to the wash cycle provides 15 minutes of slow
agitation.
WASH ONLY
This wash option performs wash cycle only. Wash indicator light
remains lighted during this cycle. Water in tub at end of this cycle is
not drained. Spin light will come on at the end of this cycle.
RINSE ONLY
First washing machine will perform spin and drain the water. Then,
the tub will be filled with fresh clean water for rinsing. Rinse agitation
will then take place with the Rinse indicator light staying on during
this cycle. Water in tub at end of this cycle is not drained. Spin light
will come on at the end of this cycle.
SPIN ONLY
Washing machine first drains any remaining water in the tub. Spin
cycle follows with the Spin light on during and at the end of the
cycle.
WASH AND RINSE ONLY
This wash option first fills the tub with water for wash agitation. At
the end of the wash cycle, water is drained. The tub is filled with
fresh clean water for the rinse cycle. Rinsing is completed (Rinse
indicator light stays on during this cycle). At the end of rinse cycle,
Spin light comes on. Water in tub at the end of rinse cycle is not
drained.
WASH AND SPIN ONLY
This wash option first fills the tub with water for wash agitation.
Water is drained and spin cycle is started. Spin indicator light stays
on at the end of the cycle.
RINSE AND SPIN ONLY
This wash option starts with draining of tub, followed by water fill
for rinse agitation. Water is drained again for the spin cycle.
SPIN SPEED
The spin speeds are designed for each of the cycles to reduce
wrinkling of the clothes. If the user chooses to override this
setting, selection can be made manually by turning the knob.
WASH ACTION TIME
For effective washing results, the washing machine increases or
decreases the wash agitation time as pre-determined in the
Wash Program selected. If the user prefers, he/she can manually
adjust the Wash Action Time by rotating the knob.
If your washer does not have this function, the washer provides
Wash Action Time for normally soiled clothes, as pre-determined
by the Wash Program.
Operation
Auto mode: To start the machine in automatic mode after you set
your machine, press the Start/Pause button. To change the
program when the machine is working, press the same button to
pause operation, change to the desired program and to start the
machine press the Start/Pause button again. Please note that the
wash program will start from the beginning.
Manual mode: Manual mode is designed for you to perform the
steps of the Wash Program independently. After selecting the Wash
Program, press the Wash Option button repeatedly to select the
appropriate wash option as indicated by the illuminated light. Press
the Start/Pause button to start the operation.
