Electrolux EWP10742, Руководство пользователя

Страница: 27 / 100

ENGLISH 27
The door has not been closed.
Display model : Error code: .
None-Display model : Door lock ‘ ’ LED
and ‘Start/Pause’ LED flashing.
The plug is not properly inserted in the
power socket.
There is no power at the socket. Insert the plug into the
power socket.
Please check your domestic
electrical installation.
The Start/Pause button has not been pressed. Press the Start/Pause button.
The delay start has been selected.
If the laundry are to be
washed immediately, cancel
the delay start.
The inlet hose is squashed or kinked.
Display model : Error code: .
None-Display model : Child lock ‘ ’ LED
and ‘Start/Pause’ LED flashing.
Check the inlet hose
connection.
The end of the drain hose is too low.
Display model : Error code: .
None-Display model : Child lock ‘ ’ LED
and ‘Start/Pause’ LED flashing.
Refer to relevant paragraph
in “water drainage” section.
The drain hose is squashed or kinked.
Display model : Error code: .
None-Display model : Washing End ‘ ’ LED
and ‘Start/Pause’ LED flashing.
Check the drain hose
connection.
The filter in the inlet hose is blocked.
Display model : Error code: .
None-Display model
: Child lock ‘ ’ LED
and ‘Start/Pause’ LED flashing.
Clean the water inlet hose
filter.
The door is not properly closed.
Display
model : Error code: .
None-Display model : Door lock ‘ ’ LED
and ‘Start/Pause’ LED flashing.
Close the door firmly.
The water tap is closed.
Display model : Error code: .
None-Display model : Child lock ‘ ’ LED
and ‘Start/Pause’ LED flashing.
Open the water tap.
Close the door firmly.
Certain problems are due to lack of simple maintenance or oversights, which can be solved
easily without calling out an engineer. Before contacting your local Service Centre, please carry
out the checks listed below.
During machine operation it is possible that the RED Start/Pause pilot light flashes to indicate
that the machine is not working.
Once the problem has been eliminated, press the Start/Pause button to restart the
program. If after all checks
, the problem persists, contact your local Service Centre.
The washing
machine
does not
start:
The machine
does not fill
the water:
The machine
fills then
empties
immediately:
TROUBLESHOOTING 9.
Malfunction Possible cause Solution
The machine
does not
empty
and/or does
not spin: