9.5
Starting a programme with
the delay start
• Press
to set the delay you want to
set. The indicator of the set delay is on.
The indicator
is on.
• Press
:
– The appliance starts the countdown.
– When the countdown is completed,
the programme starts automatically.
You can cancel or change the set
of the delay start before you press
the
.
To cancel the delay start:
1.
Press
to set the appliance to
pause.
2.
Press
until the indicator of the set
delay goes off.
Press
again to start the pro-
gramme immediately.
9.6
Interrupting a programme
and changing the options
You can change only some options be-
fore they operate.
1.
Press
. The indicator flashes.
2.
Change the options.
3.
Press
again. The programme con-
tinues.
9.7
Cancelling a programme
1.
Turn the programme knob to
to
cancel the programme and to deacti-
vate the appliance.
2.
Turn the programme knob again to
activate the appliance. Now, you can
set a new washing programme.
The appliance does not drain the
water.
9.8
Opening the door
While a programme or the delay start op-
erates, the appliance door is locked and
the indicator
is on.
CAUTION!
If the temperature and level of the
water in the drum are too high,
you cannot open the door.
Open the appliance door when the
delay start operates:
1.
Press the
to pause the appliance.
2.
Wait until the door lock indicator
goes off.
3.
You can open the door.
4.
Close the door and press the
again. The delay start continues to
operate.
Open the appliance door when the
programme operates:
1.
Turn the programme knob to
to
deactivate the appliance.
2.
Wait for some minutes and then open
the appliance door.
3.
Close the appliance door.
4.
Set the programme again.
9.9
At the end of the
programme
• The appliance stops automatically.
• The acoustic signal operates (if it is acti-
vated).
• The indicator
goes off.
• The door lock indicator
goes off.
• The indicator
is on.
• You can open the door.
• Remove the laundry from the appliance.
Make sure that the drum is empty.
• Keep the door ajar, to prevent the mil-
dew and odours.
• Close the water tap.
• Turn the programme knob to
to de-
activate the appliance.
The washing programme is
completed, but there is water in the
drum:
– The drum turns regularly to prevent the
creases in the laundry.
– The door lock indicator
is on. The
indicator
flashes. The door stays
locked.
– You must drain the water to open the
door.
To drain the water:
1.
If necessary, decrease the spin
speed. If you set
, the appliance
only drains.
ENGLISH
13
