one inlet hose
two inlet hoses
Gravity drain
Upper drain
Before washing
1. Adjust the adjustable foot making
the washer stable
Adjustable foot (extend when
clockwise rotating and shorten when
counterclockwise rotating) (Slightly
incline the washer first and loosen
the adjustable foot knob. Adjust the
adjustable foot so as to ensure four
corners of washer be steadily
contacted with the ground. Then
tighten the adjustable foot knob and
lock it. If the ground is obviously not
flat, correction should be made on
the ground surface, otherwise the
washer barrel will incline and knock
the cabinet)
2. Install the water inlet hose.
3. Connect with power source.
4. Open the water tap.
5. Fix the drain hose.
6. Put in clothes and suitable amount
of washing powder.
The water will overflow when the
height of the drain hose under
750mm.
27 electrolux
installation
operation
electrolux 28
ENG
ENG
Operation
Water Level Selection
This machine has 8 water levels. Press the water level button to select the
corresponding water level.
Start/Pause
Start / Pause button has both function of start and pause. Continuously
press this button, the machine will be switched between start and pause
mode.
Program selection
Press this button for switching over among [Normal], [Quick], [Blanket],
[Delicate], [Heavy duty], [Jeans], [Baby Clothing] and [Clean drum]
programs.
Power supply
On/Off button has function of open or close the power supply.
Temperature
Displays the washing water temperature. To select the temperature: cold,
warm and hot.
Delay start
User can set the delay start time from 1 hour to 24 hours separately. After
the time you set runs out, this machine will start to work with the set
program.
Cycle option
After start, one light will flash among the function of soak, wash, rinse and
spin according to real process.
Rinse description
This button can be used only under the normal program, and need to have
the rinsing process. Consumer can select the rinsing times and no drain
functions.
1
3
4
2
1
2
3
5
6
7
5
6
7
8
8
4
