36
Where to install
Important!
The appliance must not be used in a room where there is a dan-
ger of frost. Frost damage or impaired operation! Frost damage is not cov-
ered by the warranty.
•
The surface on which the appliance is to be installed must be firm and lev-
el. Do not install the appliance on carpets or on soft floor coverings.
•
The surface on which the appliance is to be installed must be clean and
dry and free from coverings that move, so that the appliance does not
slide.
•
If the location in which the appliance is to be installed is fitted with small-
format tiles, put a rubber mat (available in the shops) under the appliance.
Making the appliance level
3
Automatic foot:
The rear foot on the left-hand side of your washing ma-
chine is built as a shock absorbing foot, which is why the appliance gives in
the back left-hand corner if put under load. The automatic foot guarantees
that the appliance does not move even at high spin speeds. Basically the
automatic foot does not need to be set.
The four feet of the appliance are pre-ad-
justed.
Large degrees of unevenness can be
compensated for by individually adjust-
ing the height adjustable screw feet.
Use the special spanner supplied to do
this.
Important!
Do not use pieces of wood,
cardboard or such like to level out une-
venness in the floor, but adjust the height
adjustable screw feet instead.
