18
Program progress
The display indicates the stage of
the program that is currently being
performed as well as the time of
the end of the program.
3
During the washing cycle the time
of the end of the program may
change as the program adjusts it-
self to different conditions (e. g.,
type and quantity of laundry, out of balance spin detection, special rinses,
etc.).
Interrupting a program/adding washing
Interrupting a program
•
The wash program can be interrupted at any time by pressing the START/
PAUSE key. It is then re-started by pressing the key again.
•
To stop the washing machine before the program has ended, turn the pro-
gram knob to OFF.
Important:
Be careful if there is water in the appliance!
Adding washing
1.
Press the START/PAUSE key.
•
If “Door locked” and “Pause” are alternately shown in the display, it is no
longer possible to add washing, e. g. when the water level is too high.
•
If “Door openable” and “Pause” are alternately shown in the display, it is
still possible to add washing:
2.
Open the door.
3.
Add washing and close the door again.
4.
Press the START/PAUSE key again. The program continues.
Washing cycle complete/Removing the washing
At the end of the cycle a long acoustic signal sounds 3 times (when the
SOUND setting is NORMAL or LOW) and the messages “Cycle ended” and
“Door openable” appear alternately in the display.
1.
Open the door and remove the washing.
2.
Turn the programme knob to OFF.
3.
After the wash, pull out the detergent dispenser drawer slightly to allow it
to dry. Leave the door slightly open to air the inside of the washing ma-
chine.
L I N E N / E A S Y C A R E
12.45
W a s h i n g
14.37
50C 800 aýýýýýaýaýaýaýaýaýaýaýa
TEMP. C°
TEMP. C°
U/MIN.
T/MIN.
OPTION
OPTIONS
OK
OK
ZEIT
TEMPS
