Electrolux EWF12933, Руководство пользователя

Страница: 16 / 36

16 www.electrolux.com
If you turn the program selector knob
to another program when the machine
is working (except “Off” to switch off
the machine), symbol “ ” will flash
on display along with buzzer sound to
indicate a wrong selection. The
machine will not perform the new
selected program.
Different functions can be combined
which is dependent on the program
selected.
If you want to adjust washing time,
press the “Time Manager ( )”
touchpad repeatedly to increase or
decrease washing time. See Time
Manager guide on page 12.
If you want to define the end of the
washing program, press the “Delay
End ( )” touchpad repeatedly to
choose your washing machine
working time.
To pause, press Start/ Pause. The
indicator will start flashing.
-
Press the Start/Pause again. The
program will continue.
-
Changing a running program is possible
only by resetting it.
Turn the program selector knob to the
position “Off” to cancel the program
and to turn off the appliance.
-
5.5 Interruption Of A Program
5.6 Changing A Program
It may be possible to change some of the
options after a wash program has started.
Turn the program selector knob to the
new program position and change any
available options. Press Start/Pause
to start the new program.
The appliance will not drain the
water (except programs; Vapour
Refresh, Spin, Rinse + Spin).
-
5.7 Changing The Options
Press the touchpad Start/Pause. The
indicator will start flashing.
1.
If available change the options that
you wish.
2.
Press Start/Pause again. The program
will continue.
3.
2.
If an option is not compatible with
the wash program selected, symbol
“ ” will flash on display along
with buzzer sound.
-
-
The appliance will automatically
adjust the selected program duration
according to the type and size of the
load.
-
The display will show adjusted
program duration.
-
To start a program, press the Start/Pause
touchpad. The corresponding pilot light
will stop flashing and a default program
duration will be displayed on the screen.
5.4
Starting A Cycle ( )
After approx. 15 minutes from
the start of a program:
If you press any touchpad while a
program is operating, symbol “ ”
will flash on display along with buzzer
sound. (except Start/Pause touchpad)
-
-
While a program or the Delay End is
operating, the appliance door is locked
and the display shows the indicator “ ”.
First, set the machine to PAUSE by
pressing the “Start/Pause” touchpad. Wait
until the door lock indicator “ ” goes off,
then the door can be opened.
If the door lock indicator “ ” does not
disappear, this means that the machine
is already heating and the water level is
above the bottom edge of the door or the
drum is turning. In this case the door
CAN NOT be opened. If you need to
open it, you must drain the water to open
the door.
In case of emergency please
refer to “Emergency door
opening” on page 27.
5.8 Opening The Door
If you want your laundry to be spun
or use temperature different from the
one proposed by the washing
machine, pess the Spin “ ” and the
temperature “ ” touchpads
repeatedly to change the spin speed
and temperature. Press the option
touchpads, if you want your laundry
to be washed with special functions.
5.3 Options Setting
1.