Electrolux EWF12933, Руководство пользователя

Страница: 13 / 36

13
3.6 Settings
When you select this option, the detergent
is blended and dissolved in water within a
“pre-mixing technology” chamber. This will
activate the active ingredients of the
detergent before circulating the water onto
the clothes.
UltraMix (TM) ( )
3.7 Start/Pause ( ) and
Add Clothes ( ) Touchpad
Child Safety Lock Option ( )
Your appliance is provided with CHILD
SAFETY LOCK which permits you to leave
the appliance unsupervised with the door
closed without having to worry that children
might be injured by or cause damage to the
appliance.
Set this option after pressing the
Start/Pause touchpad.
To activate the function, press
“Rinse + ( ) and Easy Iron ( )”
touchpads at the same time until the
display shows the symbol “ ”.
To set “Child Lock” option:
This setting permits you to either enable
or disable the buzzer at the end of the
program. As an example, you might wish to
disable this buzzer when you start a wash
when going to bed, so that when the wash
finished approximately 1 hour later, it will
not disturb you through the night.
Error warning beeps such as
critical faults are not disabled.
Enabling/Disabling End-Of-Wash Buzzer
To deactivate the function, press
“Rinse + ( ) and Easy Iron ( )”
touchpads at the same time until the
symbol “ ” goes off.
This function remains enabled
even after the appliance is
switched off.
●
●
This touchpad has 2 functions:
This option is strongly recommended for
Cold wash.
As “UltraMix ( )” feature enhances
the detergent activation.
Please reduce
the detergent dosage if you see foam
covering the glass door completely.
NOTE:
To disable the buzzer sound, press
“Easy Iron ( ) and Prewash ( )”
touchpads at the same time for 3
seconds, and listen for “BEEP, BEEP”.
To return to default configuration press
these 2 touchpads at the same time for 3
seconds, and listen for “BEEP”.
●
Start/Pause ( ):
To interrupt a program which is running,
press this touchpad to pause the
machine, the Start/Pause pilot light
flashes.
After you have selected the desired
program and options, press this
touchpad to start the machine. The
Start/Pause pilot light will stop flashing
and remain lit until the water level is
above the bottom edge of the door then
pilot light goes OFF. If you have
selected a “Delay End” option, the
countdown will begin and will be shown
in the display.
To restart the program from the point at
which it was interrupted, press this
touchpad again, the Start/Pause pilot
light will stop flashing.
●
Add Clothes ( ):
While running a program, you may add
clothes by:
Pressing the “Start/Pause” touchpad
to pause the program.
You can only add clothes if
“Start/Pause” pilot light is lit.
-
Wait for the machine to come to a
complete stop before opening the
door.
-
Resume the program by pressing
“Start/Pause” touchpad again.
-
Add clothing and close the door.
-