Electrolux EWF1110, Руководство пользователя

Страница: 19 / 26

electrolux front loading washing machine installation instructions 15
Positioning
Install the appliance on a flat hard floor. Make sure that air
circulation around the appliance is not impeded by carpets,
rugs etc. Check that the appliance does not touch the wall
or other kitchen units. Level the appliance by raising or
lowering the feet. The feet may be tight to adjust as they
incorporate a self locking nut, but the appliance MUST be
level and stable.
Any necessary adjustment can be made with a spanner.
Accurate levelling prevents vibration, noise and
displacement of the appliance during operation.
Never place cardboard, wood or similar materials under the
appliance to compensate for any unevenness in the floor.
If necessary, check the setting with a spirit level.
Water inlet
Do not use the hose from your previous appliance to
connect to the water supply.
warning
Do not place the inlet hose downwards. Angle the
hose to the left or right depending on the position of
your water tap.
1. Set the hose correctly by loosening the ring nut. After
positioning the inlet hose, be sure to tighten the ring nut
again to prevent water leaks.
2. Connect the hose to a tap with a ¾" thread. Always use
the hose supplied with the appliance. The inlet hose
must not be lengthened. If it is too short and you do not
wish to move the tap, you will have to purchase a new,
longer hose specially designed for this type of use.
45°
35°