14
6. Select the spin speed
or No Spin Option
Press the “Spin” button repeatedly, in order to select
the desired spin speed or the No Spin
option. The
relevant LED will light up.
If you select the No Spin
option, the machine will
stop at the end of the programme eliminating the spin
phase.
EWF 890
7. Select the desired option
Press the relevent button to select the required
options. Depending on the selected programm, only
certain options are avialable and shown during the
selection phase.
Note:
Not all the options are compatible between
themselves. The uncompatible option icons will
disappear.
800
700
600
500
0
Spin
8. Start the Programme
Press the “Start/Add clothes” button. The relevant
LED will stop flashing. and only the LED relevant to
the phase that is in progress will remain lit.
9. How to change a programme
during its cycle
You can alter the programme before it starts.
When the programme has started, you can only reset
it by turning the programme selector dial to «Off»
position and then you can select the new
programme. Start it by pressing the “Start/Add
clothes” button.
10.How to interupt a programme
during its cycle
Press the “Start/Add clothes” button to interrupt a
programme which is running, the corresponding LED
starts to flash. Press the same button again to restart
the programme
.
im_ewf890_eu-ok.qxd 7-09-2005 15:05 Pagina 14
