13
Operating sequence
Before the first wash we recommend that you pour 2
litres of water into the main wash compartment
of the detergent drawer. Then run a cotton
60°C cycle , with the machine empty, in order to
remove any manufacturing residue from the drum
and tub.
Pour half a measure of detergent into the main wash
compartment and start up the machine.
1. Place the laundry in the drum
Open the door.Place the laundry in the drum, one
item at a time, shaking them out as much as
possible.Close the door.
2. Measure out the detergent
Pull out the dispenser drawer until it stops. Measure
out the amount of detergent recommended by the
manufacturer in a graduated cup and pour it into the
main wash compartment
.
If you wish to carry out the prewash or soak phase,
pour detergent into the appropriate compartment
marked
.
3. Measure out the additive
If required, pour fabric softener into the compartment
marked
,
without exceeding the «MAX» mark.
C0065
C0064
P0004
4.Switch the machine ON and OFF
Turn the selector dial to the desired programme to
the switch appliance on.To switch the appliance off
turn it to “Off”.
5.Select the desired programme
Turn the selector dial to the desired position: the
LED corresponding to the different phases making
up the selected programme illuminate.
Off
Rinse & Spin
Spin
Delicate Spin
Drain
Jeans
Delicate
Wool
Synthetic
Easy Iron
40°
40°
40°
40°
30°
Silk 30°
Quick 30
Hand Wash 30°
Cotton Eco
Cotton
Daily Cotton
60°
60°
60°
Off
Rinse & Spin
Spin
Delicate Spin
Drain
Jeans
Delicate
Wool
Synthetic
Easy Iron
40°
40°
40°
40°
30°
Silk 30°
Quick 30
Hand Wash 30°
Cotton Eco
Cotton
Daily Cotton
60°
60°
60°
im_ewf890_eu-ok.qxd 7-09-2005 15:05 Pagina 13
