manualshive.com logo in svg

Electrolux EWF 1480, Информация пользователя

Поделиться
Скачать
Electrolux EWF 1480 Скачать руководство пользователя страница 18

18

Start the Washing Program

1.

Check that the water tap is open.

2.

Start the washing program: Press the button
START/PAUSE (Marche/Pause). The washing
program is started or it starts after the set time
expires.

3

If the indicator DOOR (Tür, Porte) lights up
red when the button START/PAUSE
(Marche/Pause) is pressed, the filling door is
not correctly closed. Press the filling door
firmly closed and press the button START/
PAUSE (Marche/Pause) again.

If the time preselection is set:

The set time preselection runs and the remaining
time until the program start is shown in the multi-dis-
play (in full hours in each case). During this time you
can load washing or change/abort the time preselec-
tion.

•

Load washing: Press the button START/PAUSE
(Marche/Pause). The filling door can be opened.
Next, close the door and again press the button
START/PAUSE (Marche/Pause).

•

Change or abort time preselection: Press the but-
ton DELAY TIMER (Zeitvorwahl, Départ Différé) as
often as necessary until the required time is dis-
played; When the program run time is displayed
(shown in minutes, e.g.

125

), the washing program

starts without delay.

Содержание EWF 1480

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды