Electrolux EWF 14592 W, Руководство пользователя

Страница: 20 / 28

Problem Possible cause/Solution
Spinning starts late or the
machine does not spin:
The electronic unbalance detection device has cut in because the
laundry is not evenly distributed in the drum. The laundry is redis-
tributed by reverse rotation of the drum. This may happen several
times before the unbalance disappears and normal spinning can re-
sume. If, after 10 minutes, the laundry is still not evenly distributed
in the drum, the machine will not spin. In this case, redistribute the
load manually and select the spin programme.
• Redistribute the laundry.
The load is too small.
• Add more items, redistribute the load manually and then select
the spinning programme.
The machine makes an un-
usual noise:
The machine is fitted with a type of motor which makes an unusual
noise compared with other traditional motors. This new motor en-
sures a softer start and more even distribution of the laundry in the
drum when spinning, as well as increased stability of the machine.
No water is visible in the
drum:
Machines based on modern technology operate very economically
using very little water without affecting performance.
If you are unable to identify or solve the prob-
lem, contact our service centre. Before tele-
phoning, make a note of the model, serial
number and purchase date of your machine:
the Service Centre will require this informa-
tion.
Mod. ... ... ...
Prod. No. ... ... ...
Ser. No. ... ... ...
M
o
d
.
..
. .
..
..
.
P
ro
d
.
N
o
. .
.. .
..
.. S
er.
N
o
.
...
.
..
..
.
Technical data
Dimensions Width
Height
Depth 60 cm
85 cm
63 cm
Electrical connection
Voltage - Overall power - Fuse Information on the electrical connection is given on the rating plate,
on the inner edge of the appliance door.
Water supply pressure Minimum
Maximum 0,05 MPa
0,8 MPa
Maximum Load Cotton 8 kg
Spin Speed Maximum 1400 rpm
20 electrolux