Something not working?
Problems which you can resolve yourself.
During machine operation it is possible that one of the following messages appears on the display:
Problem with the water supply........
“No incoming water. Check tap & hose”
Problem with water draining ..........
“No drain. Check drain hose /filter”
Door open ......................................
“Door not closed. Please check”
Once the problem has been eliminated, press the START/PAUSE button to restart the programme. If after all
checks, the problem persists, contact your local Service Centre.
26
Problem
Possible cause
• The machine does not start up:
• The door is not firmly closed.
(Door not closed.
Please check)
• The machine is not plugged in or there is no power
at the socket.
• The main fuse has blown.
• The
Start/Pause
button has not been depressed.
• The
Delay Start
option has been selected.
• The machine does not fill:
• The water tap is closed.
(No incoming water.
Check tap & hose)
• The inlet hose is squashed or kinked.
(No
incoming water. Check tap & hose)
• The filter in the inlet hose is blocked.
(No
incoming water. Check tap & hose)
• The door is not properly closed.
(Door not closed.
Please check)
• The machine fills then empties
immediately:
• The end of the drain hose is too low. Refer to
relevant paragraph in “water drainage” section.
• The machine does not empty and/or
does not spin:
• The drain hose is squashed or kinked.
• The RINSE HOLD option
, NIGHT CYCLE
or
NO SPIN «
O
» has been
selected.
• The drain pump is clogged.
(No drain. Check
rain hose /filter)
• There is water on the floor:
• Too much detergent or unsuitable detergent
(creates too much foam) has been used.
• Check whether there are any leaks from one of the
inlet hose fittings. It is not always easy to see this
as the water runs down the hose; check to see if it
is damp.
• The drain hose is damaged.
• The cap on the emergency emptying hose has not
been replaced after cleaning the filter.
• The pump has not been fully screwed in after
cleaning.
132991990.qxd 01/12/2003 15:54 Pagina 26