58
maintenance and cleaning
WArnInG!
Do not lift the door by the handle. Rough handling will
cause glass to break.
Removing the oven door
The oven is equipped with a door that can be
disassembled in order to clean the panes of glass.
Positioning the door for dismantling
The door needs to be positioned at an angle to aid in the
disassembly of the panes.
• Open the door fully and flip out the hinge locating tab
to the open position.
• After the locating tab has been positioned, gently
close the oven door until it stops on the locating tab.
The door is now ready for dismantling.
Removing the top door trim
• Push in the 2 buttons on either side of the trim.
• Lift the trim away from the door.
CLEANING THE QUAD GLAZED DOOR
Removing the glass panes
• Remove the 3 panes of glass starting with pane 1.
• When removing pane 3 ensure that the 2 rubber
supports are removed before cleaning.
Do not misplace them!
Cleaning the glass panes
Clean with a damp cloth.
Do not use scouring agents or abrasive sponges as these
could damage the reflective surface.
Dry thoroughly before reassembly.
Replacing the glass panes
• Replace the glass panes back into the door starting
with pane 3.
• Ensure this pane is placed into the correct slot and
that the 2 rubber supports are in place.
• Next replace pane 2. There is a reflective coating on
this pane. This coating is indicated by a circle printed
on its surface. Ensure this circle is in the same corner
as pictured below.
Circle in this corner
• Replace pane 1 ensuring the black screening is facing
inward towards the oven.
Replacing the top door trim
Replace the trim ensuring the clips snap into the 2 location
holes. Flip the hinge locating tab back into its original
position and close the door.