Cut out dimensions (mm)
750 min
400 min
80min
55 min
115 min
400 min
If you have any doubt, please contact
a qualified person.
Do not modify your gas cooktop plug.
Do not bite, twist or tie the power
cord.
It is dangerous to modify the cooktop
specifications or features.
01. Before turning on the cooktop,
check to see if the voltage of the
outlet to be used is the same as
that indicated on the tag located
close to the plug (along the power
cord) or on the gas cooktop
identification label.
02. Install the ground cable or your
gas cooktop according to your
local requirements.
03. If you need to modify the electric
installation, this should be
performed by qualified personnel.
04. Be sure that electric plug is easy
to reach after installation.
05. Power cord should never be in
contact with hot parts of the gas
cooktop, because the plastic
protection might melt causing a
short circuit.
06. Connect the cooktop to its own
outlet. Do not use an extension
cord or adaptor plug.
07. Never ground the appliance on
PVC or gas pipes.
08. Be sure that the power cord does
not goes through the back of the
gas cooktop.
Electric installation
For your safety, check the electric conditions of the place where the gas
cooktop will be installed by a qualify electrician or contact an authorize service.
ENG
ENG
A
B
50
37 electrolux
installation
installation
electrolux 38
B
A
Model
553 mm
340 mm
728 mm
473 mm
600 mm
473 mm
ETGC30T0MKS
ETGC30T0M(P,C)KS
ETGB27CT0MKB
ETGC24R0MKS
ETGC24R0M(P,C)KS
ETGB24RF0MKB