Loading your appliance
Before placing dishes in the machine, remove any scraps of food,
to avoid clogging the filters and consequently reducing the
performance.
Do not load very small items which can fall through the
baskets.
Open the door and slide out the baskets to load the dishes.
The lower basket
The lower basket is designed to take saucepans, lids, plates,
salad bowls, cutlery etc.
Serving dishes and large lids should be arranged around the
edge of the basket, ensuring that the upper spray arm can turn
freely.
The two rear rows of prongs on the lower basket can be easily
lowered to allow you to load pots, pans and bowls.
To lower the prongs:
- Slightly pull them upward and let them drop down (see picture).
- To bring them back to the standing position, just pull them up
again.
The cutlery basket
Long bladed knives stored in an upright position are a
potential hazard. These items should only be placed in the
removable knife basket. Take care when loading or
unloading sharp items such as knives.
Removable knife basket
Long and/or sharp items
of cutlery such as
carving knives must be
positioned horizontally in
the removable knife
basket which is
positioned at the rear of
the upper basket.
Cutlery should be placed in the removable cutlery basket with the
handles facing downwards.
If the handles protrude from the bottom of the basket, obstructing
the lower spray arm, load the cutlery with the handles facing
upwards.
Mix spoons with other cutlery to prevent them from sticking
together.
Silver cutlery tends to go black if mixed with steel cutlery. Place it
in the cutlery basket separate from the others.
For best results we
recommend to use the cutlery
grid provided (if the size and
the dimensions of the cutlery
allow it).The cutlery basket
can be placed either to the left
or to the right of the lower
basket.
The upper basket
The upper basket is designed for plates (dessert plates, saucers,
dinner plates of up to 25 cm in diameter), salad bowls, cups and
glasses.
Arrange items so that water can
reach all surfaces.
Glasses with long stems can be
placed upside down in the cup
racks.
Light items (plastic bowls etc.)
should be loaded in the upper
basket and arranged so they do
not move.
In case that plates are loaded in the upper
basket:
load them starting from the rear
positions of the basket, tilting
them forwards and avoiding the
front positions near the door.
Before closing the door, ensure that the spray arms can
rotate freely.
Adjusting the height of the upper basket
If washing very large plates (over 27 cm and up to 32 cm in
diameter) you can load them in the lower basket after moving the
upper basket to the higher position.
To move to the higher
position proceed as follows:
1. Move the front runnner
stops (A) of the upper
basket outwards and slide
the basket out.
2. Refit the basket in the
higher position and replace
the stops (A) in their original
position.
When the top basket is in the higher position it will only take
plates up to 20 cm in diameter and you will not be able to
use the cup racks.
After loading your machine always close the door, as an
open door can be a hazard.
7
Using your appliance
US64
US71
RC01
UI50
UI47
UI43
UI44
UI42
UI53
Содержание ESL6123
Страница 1: ...D i s h w a s h e r Instruction book Model ESL 6123 GB ...
Страница 14: ......
Страница 15: ......