THE CONTROLS
In this fully integrated appliance the controls are locat-
ed on top of the door. When selecting a programme,
the door needs to be partially opened.
Audible signals have been introduced to help indicate
which operations the dishwasher is performing.
Short «instruction accepted» signal
When any of the buttons is pressed: a short audible
signal informs you that the machine has accepted the
instruction given; if no signal is heard when a button is
pressed, this means that a programme is already run-
ning or that the programme selected does not include
this function.
Long «programme run» signal
A continuous audible signal lasting about one second,
heard only when you close the dishwasher door, in-
forms you that the wash programme is starting.
Intermittent «end of programme» signal
An intermittent audible signal, lasting in total five sec-
onds, informs you that the wash programme has ended.
If you wish to deactivate these audible signals, press
both the NO DRYING
and DELAYED START)
buttons together for about 3 seconds, until three short
signals are heard.
To reactivate the audible signals, press both buttons
together again for about 3 seconds, until the «short
instruction accepted» signal is heard.
1. ON/OFF button
On
Press this button to preset the dishwasher to accept
settings (selection of wash programmes, drying
options, delayed start, etc.).
The salt pilot light
(3) and the rinse aid light
(2)
comes on if salt or rinse aid are low and the
programme selector light
(5) flashes.
The number
corresponding to the first selectable
programme (Rinse and Hold) appears in the digital
display.
Off
When the wash programme has ended, the dishwasher
stops automatically (an intermittent audible signal
lasting about 5 seconds informs you of this) and a
flashing horizontal line
appears in the digital
display.
To switch off the dishwasher at the end of the pro-
gramme, press this button again.
2. Rinse aid indicator light
This pilot light comes on when the rinse aid has run
out, to remind you to top it up.
3. Salt indicator light
This pilot light comes on when the salt has run out, to
remind you to top it up.
If your water is level «0» there is no need of salt,
therefore the Salt indicator light will always remain on.
4. Digital display
START
USE
PPC18GB
5
START
1
2
6
7
3 4
5
9
8
Control panel
START
SO80
