Electrolux ESL 6163, Инструкция по использованию и уходу

Страница: 5 / 20

Function buttons:
in addition to the selection of the
washing programme and the delay start option, the following
functions can also be set with the help of these buttons:
- the setting of the water softener,
- the cancelling of a washing programme in progress,
- deactivation/activation of the audible signals.
Programme selection buttons:
allows the selection of
the desired washing programme (see "Washing programmes"
chart).
«Delay start» button:
this option allows the start of the
programme to be delayed from 1 to 19 hours.
The digital display indicates:
- the level of hardness to which the water softener is set,
- if the audible signals are activated/deactivated,
- the approximate remaining time of the running programme,
- the end of the programme (a zero 0 will appear in the digital
display),
- the countdown of the delay start,
- fault codes concerning malfunction of the dishwasher.
Indicator lights:
have the following meanings:
Audible signals
Audible signals have been introduced to help indicate which
operations the dishwasher is performing:
- setting of the water softener
- end of programme
- intervention of an alarm due to malfunction
Deactivation/activation of the audible signals
(The dishwasher must be switched off before starting this
procedure)
Factory setting: audible signals activated
1. Press the On/Off button. The indicator lights of the
programme selection buttons will illuminate (setting mode).
If only one programme selection button indicator light is
illuminated this means that a washing programme is set.
The programme must be cancelled: press simultaneously
function buttons 2 and 3 for about 2 seconds, the indicator
light of the set programme button starts flashing. After
about 2 seconds the indicator lights of all the programme
selection buttons will illuminate; this means that the set
washing programme has been cancelled and the machine is
now in setting mode.
2. Press simultaneously function buttons 2 and 3, the indicator
lights of the function buttons 1, 2 and 3 start flashing.
3. Press function button 3, the indicator lights of function
buttons 1 and 2 turn off while the indicator light of the button
3 goes on flashing, the digital display indicates the current
setting.
4. To change the current setting, press again function button 3,
the digital display will indicate the new setting.
5. To memorise the operation, switch off the dishwasher by
pressing the On/Off button or wait about 60 seconds after
which the dishwasher will automatically return to setting
mode.
The Control Panel
5
Function buttons
Indicator lights
Digital display
Programme selection buttons
On/Off button
Delay start button
Salt refilling indicator light, illuminates when the salt
has run out.
Rinse aid refilling indicator light, illuminates when
rinse aid has run out.
Audible signals deactivated
Audible signals activated (factory set)