background image

6

Cleaning and Care

4. Auto-clean function. 

The auto-clean function helps to slow 
down scaling and build up in the iron. It is 
recommended to perform the auto-clean 
function every 4 weeks.

 

Cleaning (do not use any detergent)

1. Unplug the iron before cleaning. 

Always place the iron on its heel rest and 
allow cooling down. To clean exterior 
surfaces, use a damp soft cloth and wipe 
dry. Do not use any chemical solvents, as 
these will damage the surface.

2. Cleaning the soleplate. 

Do not use scouring pads or harsh 
cleaners on the soleplate as these may 
damage the surface. To remove burnt 
residue, iron over a damp cloth while 
the iron is still hot. To clean the soleplate, 
simply wipe with a soft damp cloth and 
wipe dry.

3. Permanent anti-scale cartridge 

The permanent anti-scale cartridge 
prevents scale from building up into the 
soleplate and will help to extend the 
life of the iron if the auto-clean function 
is performed regularly. This system is 
permanent and does not need to be 
replaced.

Auto-clean function for model without 

auto-steam function (ESI7304).

Fill the water tank up to 100ml with cold 

tap water. Place the iron on its heel rest. 

Plug the iron and set the temperature 

selector (L) to the MAX position. When 

the temperature indicator light (J) turns 

green, unplug the iron, and hold it over 

a sink, then turn the steam selector (E) 

to the auto-clean position and pull out 

the button (F). Gently shake over the sink 

until all the water is gone. Insert the auto-

clean button (F) back and press until it 

clicks. Turn the iron on the MAX setting to 

dry the soleplate. Once the temperature 

indicator light (J) turns green again, 

unplug the iron, let it cool down on its 

heel rest and wipe the soleplate with a 

dry cloth.

Auto-clean function for model with 

auto-steam function (ESI7504).

Fill the water tank up to 100ml with cold 

tap water. Place the iron on its heel rest. 

Plug the iron and set the temperature 

selector (L) to the MAX/autoclean 

position. When the temperature indicator 

light (J) turns green, unplug the iron, 

and hold it over a sink, then pull out 

the auto-clean button (F). Gently shake 

over the sink until all the water is gone. 

Insert the auto-clean button (F) back 

and press until it clicks. Turn the iron on 

the MAX setting to dry the soleplate. 

Once the temperature indicator light (J) 

turns green again, unplug the iron, let it 

cool down on its heel rest and wipe the 

soleplate with a dry cloth.
•   

Attention, if the temperature selector 

(L) is not on MAX/auto clean position, it 

will not be possible to pull out or place 

back the auto-clean button (F).

Содержание ESI 7 Series









Отзывы: