background image

4

Getting Started

1. Before first use.

Remove all adhesive and gently rub

with a dampened cloth before plugging

in the iron.
We recommend that you rinse the

water tank by operating the steam in a

horizontal position away from your linen

for one minute. When the iron is turned

on for the first time, harmless vapours/

odours may be emitted temporarily.

This will cease quickly.

 

2. Filling the water tank.

Make sure the iron is unplugged.
Set the temperature selector (L) to 

position 0. Open the water filling inlet 

cover (D). Using the beaker provided, pour

water up to maximum level. Close the 

cover until it clicks.

Caution: 

Do not exceed the maximum water 

level as indicated on the water tank (N).

Type of water to be used:

 This iron has been 

designed to use normal tap water. If the 

tap water in your area is very hard, you can 

fill the tank with 50% tap water and 50% 

bottled distilled water. Never use distilled 

water only. Never put scented water, 

vinegar or ironing aids in the water tank. 

This may cause brown spitting and staining.

3.  Plug the power cable into a power 

outlets.

Set the temperature selector (L) according 

to the fabric type by referring to the 

garment label or the ironing chart below. 

The temperature indicator light (J) turns 

red. When the temperature indicator 

light (J) turns green, the iron is ready to 

use. The light will switch between red 

and green as the iron is maintaining the 

selected temperature.

4.  

Adjust steam and temperature 

settings for the model without the 

auto-steam function (ESI7304).

Set the temperature selector (L) according

to the fabric type by referring to the

ironing chart. Then adjust the

steam output by setting the steam 

selector (E) according to the fabric

type by referring to the ironing chart 

below.
For “Dry ironing”, set the steam selector 

(E) to the position “off”.

5.  Adjust the ironing settings for  

the models equipped with the  

auto-steam function (ESI7504).

The auto-steam function regulates

the steam amount according to the

temperature set. Set the temperature

selector (L) according to the fabric type

by referring to the ironing chart below, 

the steam output will be automatically 

adjusted to deliver the most effective 

combination for the type of fabric selected.

For “Dry ironing”, press down the “no 

steam” button (G). To come back to steam 

function, press again the button.

Tips: 

Setting the right temperature:

Check the laundry care label for the

fabric type. If you select a lower

temperature setting whilst in use, wait

for a few minutes before ironing to make

sure the iron has cooled down. Setting the

right amount of steam: Always make sure

that the steam setting selected is suitable

for the temperature set and fabric type.

The iron is equipped with an anti-drip

device to prevent water from dripping

out of the soleplate when the temperature

selected is too low.

Electrolux

Pia Ringholm

2012-05-10

1:1

SDA

, Mahé 

Iron

AUS

print graphics

Factory: Donlim

191 4994

G

change of knob direction

graphics. /Pia

120522

Changed the Ultrasteam 

symbol to 600. /Pia

121008

Added pos 10, 11 and 12. 

/Pia

130709

Changed pos 10, 11, 13

/Pia

130709

-01

-02 (ESI710B)

-08 

-09

-03 (ESI730B)

-04 (ESI750B)

-07 (ESI750B)

-05 (ESI710B)  

-06 (ESI730B)  

-10 (ESI7204B)  

-11 (ESI7004R)  

-12

-13 (ESI7004R)

-14 (ESI7204B)

-15

-16

-17

-18

Electrolux

Pia Ringholm

2012-05-10

1:1

SDA

, Mahé 

Iron

AUS

print graphics

Factory: Donlim

191 4994

G

change of knob direction

graphics. /Pia

120522

Changed the Ultrasteam 

symbol to 600. /Pia

121008

Added pos 10, 11 and 12. 

/Pia

130709

Changed pos 10, 11, 13

/Pia

130709

-01

-02 (ESI710B)

-08 

-09

-03 (ESI730B)

-04 (ESI750B)

-07 (ESI750B)

-05 (ESI710B)  

-06 (ESI730B)  

-10 (ESI7204B)  

-11 (ESI7004R)  

-12

-13 (ESI7004R)

-14 (ESI7204B)

-15

-16

-17

-18

Содержание ESI 7 Series









Отзывы: