9
Prior to using for the first time
Prior to using for the first time, remove all the clips
with which the dish racks are secured for transport.
Then perform the following steps:
1.
Adjust the water softener
2.
Filling with Special Salt for the Water Softener
3.
Filling with Rinse Aid
Adjusting the Water Softener
To prevent the build up of scale on dishes and in the
dishwasher, the dishes must be washed with soft, i.e.
low lime content water. For this reason the dish-
washer is fitted with a water softener in which tap
water from a hardness of 4 °d (German degrees) is
softened with the aid of special salt.
3
Your local water authority can advise you on
the hardness of the water in your area.
The water softener has 4 settings.
Adjust the water softener in accordance with the table
to suit your area:
1.
Open the door on the dishwasher.
2.
Remove the lower rack from the dishwasher.
3.
Adjust the water hardness switch with, e.g. a coin.
4.
Replace the lower rack and close the door of the
dishwasher.
Water Hardness
in
°d
1
)
in
ppm
2
)
1)(°d) German degree, measure of water hardness
2)(ppm) parts per million (CaCO
3
)
*Factory setting
Turn the arrow on the water
hardness switch to number
29-50
22-28
510 - 900
390 - 500
4
3
15-21
260 - 380
2*
4-14
70 - 250
1
under 4
under 70
1
no salt necessary
Содержание ESF 631
Страница 1: ...D i s h w a s h e r User Instructions ANC 822 945 701 00 0102 ESF 631 EN ...
Страница 29: ...29 ...
Страница 30: ...30 ...
Страница 32: ......