164
www.electrolux.com
• The electrical outlet should be readily
accessible so that the unit can be
unplugged easily in an emergency. Or it
should be possible to isolate the oven
from the supply by incorporating a switch
in the fixed wiring in accordance with the
wiring rules.
• The socket should not be positioned
behind the cupboard.
• The best position is above the cupboard,
see (A).
• Connect the appliance to a single phase
230 V/50 Hz alternating current via a
correctly installed earth socket. The
socket must be fused with a 10 A fuse.
• The power supply cord may only be
replaced by an electrician.
• Before installing, tie a piece of string to
the power supply cord to facilitate
connection to point (A) when the
appliance is being installed.
• When inserting the appliance into the
high-sided cupboard, DO NOT crush the
power supply cord.
• Do not immerse the power supply cord
or plug in water or any other liquid.
(A)
9.3
Connecting the appliance to the power supply
9.2
Safe use of the appliance
If fitting the microwave in position B or C:
• The cupboard must be a minimum of
500 mm (E) above the worktop and
must not be installed directly above a
hob.
• This appliance has been tested and
approved for use near domestic gas,
electric and induction hobs only.
• Sufficient space between hob and
microwave should be allowed to prevent
overheating of microwave oven,
surrounding cupboard and accessories.
• Do not operate the hob without pans
when the microwave oven is operating.
• Care should be taken when attending to
the microwave oven while the hob is on.
6_Electrolux_EN230_CS_AJ26_Layout 1 30/09/2015 10:23 Page 164
Содержание EMS17005O
Страница 166: ...166 www electrolux com 6_Electrolux_EN230_CS_AJ26_Layout 1 30 09 2015 10 23 Page 166 ...
Страница 167: ...167 ENGLISH 6_Electrolux_EN230_CS_AJ26_Layout 1 30 09 2015 10 23 Page 167 ...
Страница 168: ...electrolux com shop TINS B125URR0 125 Electrolux_Cover_AJ26_Layout 1 29 09 2015 12 55 Page 2 ...