Electrolux EMG25D89GGP, Инструкция по установке и эксплуатации

Страница: 13 / 40

12
Operation Instructions

During cooking, press STOP/CLEAR once to pause the program, then press START/+30 to resume.
Press STOP/CLEAR twice to cancel the program.

After ending cooking, beep will sound and the screen will display End, if there is not any operation in
two minutes, beep will sound again, and then the oven will to return to standby mode.

In standby mode or after cooking ends, the backlight becomes dim after 60 seconds. Open the oven
door or press any button to light the backlight screen.

The oven will automatically return to standby mode if no input is received after 20 seconds in the
process of setting up.
Setting clock time
This is a 24 hours clock.
1. In standby mode, press and hold the TIMER for 3 seconds.
2. Turn START/+30 dial to set hour.
3. Press START/+30 dial once to confirm the hour setting.
4. Turn START/+30 dial to set minute.
5. Press START/+30 dial once to confirm the setting.
Setting the timer
1.
Press TIMER once.
2.
Turn START/+30 dial to enter desired time. The longest time is 95 minutes.
3.
Press START/+30 dial to confirm.
NOTE: When the countdown ends, the buzzer will beep to remind you. You can check the countdown
time by pressing TIMER, but if STOP/CLEAR is pressed when the display shows the time, the function
will be cancelled.
Express cooking
The oven will cook food quickly at HIGH power (100% power output) for express cooking program.
In standby mode, just press the START/+30 dial once, the oven starts working automatically at full power.
The default cooking time is 30 seconds.
NOTE: You can turn START/+30 dial to set cooking time, and then press the START/+30 dial to start.
During cooking, you can also add the cooking time by pressing START/+30 dial repeatedly. The longest
time is 95 minutes.
Microwave cooking
1.
In standby mode, press MICROWAVE a number of times to select power level.
2.
Turn the START/+30 dial to enter cooking time. The longest cooking time is 95 minutes.
3.
Press START/+30 dial to confirm.
Press MICROWAVE repeatedly to select power level: