Electrolux EL8600 Series Скачать руководство пользователя страница 6

Страница: 6 / 6

Picture D.5

E. Suction Motor Removal / Installation

•

Remove the Filter Cover and HEPA filter

•

Remove 3x T-20 screws from beneath the HEPA filter (Picture E.1)

•

Remove 3x T-20 screws from front of motor housing, you will need to tilt the handle back

in order to access the screws (Picture E.2)

•

Remove the Front Motor Cover to access the motor

•

Reassemble in reverse order

Picture E.1

Picture E.2

Содержание EL8600 Series

Страница 1: ...Page 3 Brushroll Motor Drive Assembly Section C Page 4 Front Housing Section D Page 5 Suction Motor Section E Page 6 1 Tools Required Saftey Glasses Clean Pad or Soft Cloth to prevent scratching of plastic parts during repair Phillips Head Screwdriver Flathead Screwdriver Torx 20 Screwdriver Torx 10 Screwdriver ...

Страница 3: ...e on left side while facing the unit to release hood clip Picture B 1 Press in on front snaps to disengage from base Picture B 2 While pulling the handle release pedal back lift upwards on the hood until the snap disengages from the right side Picture B 3 Reassemble in reverse order Picture C 1 Picture C 2 Picture C 3 3 ...

Страница 4: ... Disconnect the positive and negative terminals from the motor Picture C 2 Remove 1x T 20 screw from the Drive Assembly Picture C 1 Lift the Drive assembly out of base and use flathead screwdriver to disengage the four clips which hold the cover in place Picture C 3 Now belt is accessible for replacement Reassemble in reverse order Picture C 1 Picture C 2 Picture C 3 ...

Страница 6: ...move 3x T 20 screws from beneath the HEPA filter Picture E 1 Remove 3x T 20 screws from front of motor housing you will need to tilt the handle back in order to access the screws Picture E 2 Remove the Front Motor Cover to access the motor Reassemble in reverse order Picture E 1 Picture E 2 6 ...