Electrolux EL8600 Series Скачать руководство пользователя страница 3

Страница: 3 / 6

B. Hood Removal / Installation

• Remove the Soleplate & Brushroll (Section A)

• Using Flathead Screwdriver, pry bewteen hood and base on left side, while facing the unit,

to release hood clip (Picture B.1)

• Press in on front snaps to disengage from base (Picture B.2)

• While pulling the handle release pedal back, lift upwards on the hood until the snap

disengages from the right side (Picture B.3)

• Reassemble in reverse order

Picture C.1

Picture C.2

Picture C.3

Содержание EL8600 Series

Страница 1: ...Page 3 Brushroll Motor Drive Assembly Section C Page 4 Front Housing Section D Page 5 Suction Motor Section E Page 6 1 Tools Required Saftey Glasses Clean Pad or Soft Cloth to prevent scratching of plastic parts during repair Phillips Head Screwdriver Flathead Screwdriver Torx 20 Screwdriver Torx 10 Screwdriver ...

Страница 3: ...e on left side while facing the unit to release hood clip Picture B 1 Press in on front snaps to disengage from base Picture B 2 While pulling the handle release pedal back lift upwards on the hood until the snap disengages from the right side Picture B 3 Reassemble in reverse order Picture C 1 Picture C 2 Picture C 3 3 ...

Страница 4: ... Disconnect the positive and negative terminals from the motor Picture C 2 Remove 1x T 20 screw from the Drive Assembly Picture C 1 Lift the Drive assembly out of base and use flathead screwdriver to disengage the four clips which hold the cover in place Picture C 3 Now belt is accessible for replacement Reassemble in reverse order Picture C 1 Picture C 2 Picture C 3 ...

Страница 6: ...move 3x T 20 screws from beneath the HEPA filter Picture E 1 Remove 3x T 20 screws from front of motor housing you will need to tilt the handle back in order to access the screws Picture E 2 Remove the Front Motor Cover to access the motor Reassemble in reverse order Picture E 1 Picture E 2 6 ...