Electrolux EKM 6035, Инструкция пользователя, Страница: 23 / 37

electrolux 23
Ignition electrode Ignition electrode
Ignition electrode Ignition electrode Ignition electrode
The electric ignition is obtained
through a ceramic "electrode" and a
metal electrode. Keep these components
well clean, to avoid difficult lighting, and
check that the burner crown holes are not
obstructed.
The Hotplate The Hotplate
The Hotplate The Hotplate The Hotplate
Spills onto the actual plate should be
removed using warm water and a soft
brush, nylon or plastic scourer. To keep
the plate looking as new, hotplate
conditioner can be purchased from
most hardware stores (follow the
manufacturer's instruction for use).
Alternatively, wipe the plate with a
drop of olive oil on a kitchen towel to
avoid rust. It is important to note that the
plate will smoke a little and produce a
slightly unpleasant odour when next
used
Drying Drying
Drying Drying
Drying
Important: After cleaning, dry the
hotplate thoroughly by switching on to
a low-medium setting for a few minutes.
Before any maintenance or
cleaning can be carried out, you
must
DISCONNECT the appli-
ance from the electricity supply.
This appliance cannot be
cleaned with steam or with a
steam cleaning machine.
The Hob T The Hob T
The Hob T The Hob T
The Hob Top op
op op
op
The hob is best cleaned whilst it is still
warm, as spillage can be removed more
easily than if it is left to cool.
Regularly wipe over the hob top using
a soft cloth well wrung out in warm water
to which a little wasing up liquid has been
added. Avoid the use of the following:
- household detergent and bleaches;
- impregnated pads unsuitable for non-
stick saucepans;
- steel wool pads;
- bath/sink stain removers.
Should the hob top become heavily
soiled, it is recommended that a cleaning
product such as Hob Brite or Bar Keepers
Friend is used.
Pan Supports Pan Supports
Pan Supports Pan Supports
Pan Supports
The pan supports are dishwasher
proof. If washing them by hand, take care
when drying them as the enamelling
process occasionally leaves rough
edges. If necessay, remove stubborn
stains using a paste cleaner.
The Burners The Burners
The Burners The Burners The Burners
The burner caps and crowns can be
removed for cleaning.
Wash the burner caps and crowns
using hot soapy water, and remove
marks with a mild paste cleaner. A well
moistened soap impregnated steel wool
pad can be used with caution, if the
marks are particularly difficult to remove.
After cleaning, be sure to wipe dry
with a soft cloth.
Maintenance and Cleaning