manualshive.com logo in svg

Electrolux EIFLW55H MB, Техническое и сервисное руководство

Поделиться
Скачать
Electrolux EIFLW55H MB Скачать руководство пользователя страница 37

3-1

Electronic Control

Control Panel (User Interface Layout)  Wave-Touch™

Selecting the Appropriate Cycle and Settings Overview

Turn the cycle selector knob in either direction to select the cycle desired.  The icon for that cycle will be 
illuminated and if the cycle description feature is turned on, the cycle and estimated cycle time are displayed on the 
User Interface screen for 5 seconds. Press any key to advance the User Interface to select settings and options. 

Press any key or the User Interface screen will automatically advance after 5 seconds and display the preset wash 
water temperature, fi nal spin speed and soil level for each cycle.  

To change the settings, press the temp, spin speed, and soil level buttons to scroll to the desired settings. Press the 
scroll up or scroll down buttons under options to scroll through the options menu.  Press the select button to add or 
delete options.  The estimated cycle time will be displayed at the top of the screens. 

Adjustments to a cycle will be remembered and recalled each time that cycle is selected in the future.  To return to the 
factory default settings, select RESET in set prefs under the options scroll buttons. 

Demo Mode

Demo Mode will standby for 10 minutes then perform an LED on/off sequence for 3 minutes.  During the standby 
sequence the drum light and start button will be activated.  The controls will be fully functional during Demo Mode with 
abbreviated cycles lasting about 1 minute.  Some features will be deactivated during Demo Mode for safety purposes.  
When the units are in Demo Mode the text “DEMO MODE” will be displayed in the LCD screen.  Demo mode will be 
saved if the units are unplugged or if there is a power outage.  To deactivate Demo Mode repeat steps 1-3 below.

NOTE:

  Set the controls to the desired language in the SET PREFS menu. After the unit has been set to DEMO 

mode the language can not be changed.

1.   Turn the cycle selector knob to SPIN ONLY cycle, press the START button then the CANCEL button.
2.   Activate the controls by turning the cycle selector knob and turn to SPIN ONLY cycle.
3.   Press and hold CANCEL button and SOIL LEVEL (Third button from the left) for 3 seconds.
4.   DEMO MODE instructions have to be completed by 7 seconds of the control activation.
5.   Press the CANCEL button to begin DEMO MODE.
6.   To deactivate DEMO MODE repeat steps 1 – 3.

Figure 3-1.  Wave-Touch™ Control Panel

Cycle Selector

Spin Speed

Temperature

Soil Level

Options Scroll

User Interface 

Display

Содержание EIFLW55H MB



























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды