Electrolux EI30BM60MS, Руководство по установке

Страница: 24 / 72

Printed in China
EN-24





Locate and mark holes to align with holes in the
mounting plate.
IMPORTANT:
LOCATE AT LEAST ONE STUD ON EITHER SIDE OF
THE CENTERLINE.
MARK THE LOCATION FOR 2 ADDITIONAL, EVENLY
SPACED TOGGLE BOLTS IN THE MOUNTING PLATE
AREA.
Locate and mark holes to align with holes in the
mounting plate.
IMPORTANT:
LOCATE AT LEAST ONE STUD ON EITHER SIDE OF
THE CENTERLINE.
MARK THE LOCATION FOR 2 ADDITIONAL, EVENLY
SPACED TOGGLE BOLTS IN THE MOUNTING PLATE
AREA.
Trim the rear wall template along the dotted line.
Trim the rear wall template along the dotted line.

 
 
3/8" TO EDGE



12"
4"
NOTE: IT IS VERY IMPORTANT TO
READ AND FOLLOW THE DIRECTIONS
IN THE INSTALLATION INSTRUCTIONS
BEFORE PROCEEDING WITH THIS
REAR WALL TEMPLATE.
This Rear Wall Template serves to position the bottom
mounting plate and to locate the horizontal exhaust
outlet.
1. Use a level to check that the template is positioned
accurately.
2. Locate and mark at least one stud on the left or
right side of the centerline.

It is important to use at least one wood
screw mounted firmly in a stud to support the weight
of the microwave. Mark two additional, evenly spaced
locations for the supplied toggle bolts.
3. Drill holes in the marked locations. Where there is
a stud, drill a 3/16" hole for wood screws. For holes
that do not line up with a stud, drill 5/8" holes for
toggle bolts.

DO NOT INSTALL THE MOUNTING PLATE
AT THIS TIME.
4. Remove the template from the rear wall.
5. Review the Installation Instruction book for your
installation situation.
Part No.: 316902912
＂
2
/
1
-
4
3/8＂
3/8＂
3/8＂
3/8＂
13-3/8＂ 8-1/4＂
2＂
2＂
12-1/2＂
6-1/4＂
＂
2
3
/
7
2
-
9
＂
4
/
1
-
4
3/8＂ 3/8＂
3/8＂
2＂
1/2＂
13-3/8＂
Part No.:77222
316902475
3/8" TO EDGE
          


  
NOTE: IT IS VERY IMPOR TANT TO READ AND FO LLOW THE DI RECTIONS IN THE INST ALLATION INS
TRUCTIONS
BEFORE PROC
EEDING WITH THIS REAR WALL T EMPLATE. This Rear Wal l Template se rves to posit ion the botto m mounting plat e and to loca te the horizo
ntal exhaust
outlet. 1. Use a leve
l to check th at the templa te is positio ned accurately . 2. Locate and mark at leas t one stud on the left or right sid e of the cent erline.  It is importa nt to use at
least one woo d
screw mounted
firmly in a stud to suppo rt the weight of the microw ave. Mark two additional, evenly spaced locations for the supplied toggle bolts . 3. Drill hole s in the mark ed locations. Where there
is
a stud, d rill a 3/16" hole for wood
screws. For holes
that do n ot line up wi
th a stud, dr ill 5/8" hole s for
toggle bol
ts.  DO NOT INSTAL L THE MOUNTIN G PLATE AT THIS TIME. 4. Remove the template fro m the rear wa ll. 5. Review the Installation
Instruction book for your
installat
ion situation .
Locate and mark holes to align wi th holes in
the
mounting pl ate. IMPORTANT:
LOCATE AT L EAST ONE STU D ON EITH ER SIDE OF THE CENTER LINE. MARK THE L OCATION FO
R 2 ADDITION AL, EVENLY SPACED TOGG LE BOLTS IN THE MOUNTI NG PLATE AREA.
Locate and mark holes t o align wi th holes in the mounting pl ate. IMPORTANT: LOCATE AT
LEAST ONE S TUD ON EIT HER SIDE OF THE CENTERL INE. MARK THE LO CATION FOR 2 ADDITIONA
L, EVENLY
SPACED TOG GLE BOLTS
IN THE MOUNT ING PLATE AREA.
Trim the r
ear wall t emplate along the dotted line.
Trim the re ar wall temp late along the dotted
line.





 


 
  
12"
4"
Darle vuelta a la hoja para consultar la versión en Esp añol.

3/8" TO EDGE

              
  
NOTE: IT IS VERY I MPORTANT T O READ AND FOLLOW THE DIRECTIONS IN THE INS TALLATION INSTRUCTIO
NS
BEFORE PRO
CEEDING WIT H THIS REAR WALL TEMPLATE. This Rear Wall Templa te serves to position the botto m mounting pl ate and to l ocate the h orizontal e
xhaust
outlet. 1. Use a lev el to check
that the template is positioned
accurat
ely. 2. Locate a nd mark at least one s tud on the left or right s ide of the centerline .  It is impor tant to use at least
one wood
screw mount ed firmly i n a stud to
support the weight
of the micr
owave. Mark two additi onal, eve nly spaced locations f or the supp lied toggl e bolts. 3. Drill ho les in the marked loca tions. Wher e there is a stud, drill a 3/ 16" hole f or wood sc rews. For h
oles
that do not line u p with a s tud, drill
5/8" holes for
toggle bolts. 
DO NOT INST ALL THE MOU NTING PLAT E AT THIS TIME . 4. Remov e the temp late from the rear wall . 5. Review t he Installa tion Instr uction book for your install ation situa tion.
Locate an d mark ho les to al ign with ho les in the mounting p late. IMPORTANT: LOCATE AT LEAST ON
E STUD ON EITHER SID E OF THE CENTER LINE. MARK THE LOCATION FOR 2 ADD ITIONAL, EV ENLY SPACED TO GGLE BOLTS IN THE MOU
NTING PLATE
AREA.
Locate and mark hol
es to alig n with ho les in the
mounting
plate. IMPORTANT: LOCATE AT LEA ST ONE STUD ON EITHE
R SIDE OF
THE CENTE RLINE. MARK THE L
OCATION F OR 2 ADDIT IONAL, EV ENLY SPACED TOG GLE BOLTS IN THE MOU NTING PLAT E AREA.
Trim the rear wall template along the dotted l ine.
Trim th e rear wa ll templ ate along
the dot ted line.








  
   
12"
4"
Darle vuelta a la hoja para consultar la versión en Español.

Darle vuelta a la hoja para consultar la
versión en Español.
PN: 2618003 9832 1